Product

Baumer Gas Filled Thermometer with Capillary and Contacts (Model TSFE)

Main Features :

For corrosive gasses and liquids
Class 1 according to EN 13190
Capillary 0.5 to 30 m
Mechanical or inductive contacts

Applications :

Food & Beverage
Oil & Gas / Chemical
Laboratory & Medical
Energy

Categories: ,
Description

Technical Data :

Nominal size 100, 160 mm
Temperature ranges -200 … 800 °C
Accuracy Class 1 (according to EN 13190)
Protection rating IP 65 (EN 60529)
Immersion tube Stainless steel 1.4541 (AISI 321)
Capillary Stainless steel 1.4541 (AISI 321)
max. length 30 m
Bezel ring Stainless steel 1.4301 (AISI 304)
Window Laminated safety glass
Movement Brass
Window gasket Elastomer
Dial Aluminium, white
Pointer Aluminium, black
Accessories Sliding connections and thermowells, see datasheets:
B51.01 (AGF/AGW) and T6.215 (Ø 8)
Temperature limit 130 % F.S.

ATEX Only for inductive contacts (type 8xxx)
Type examination certificate
DEKRA 14 ATEX 0034
EN 60079-0 : 2009
EN 60079-11 : 2007
EN 61241-11 : 2006
Marking
0344
II 2 G
Ex ia IIC T4 Gb
II 2 D
Ex ia IIIC T135 °C … T85 °C Db
Electrical data
Umax = 20 Vdc
Imax = 60 mA
Pmax = 130 mW
Sensor type: SI2-K08-Y1 (Turck)
Stainless steel housing 1.4404 (316L) Code 0110
Movement stainless steel Code 0651
Process connections (see table on page 4/5) Code 73xx
Oil filling (paraffin oil, Ondina) Code 0777
Screws secured with loctite Code 0799
Accuracy +/- 0.6 % F.S. Code 0840
(1) xxxx = L in mm.
Customer specific immersion length (1) Code 9003_xxxx
Red mark Code 9700
Green mark Code 9701
Stainless steel tag plate and wire Code 9941
This certification is valid for connection to a certified intrinsically safe
circuit with maximum values as listed above and in the instructions
and certificate of the sensor.