Product
Baumer_Fully Welded Pressure Transmitter for Industrial Applications (Model PBMN – Low Pressure)
Overview :
■ Excellent accuracy and active temperature compensation for precise pressure measurements
■ Measuring range from -0.1 … 0.1 bar up to 0 … 40 bar
■ Universal field of applications due to fully welded and robust stainless steel housing
■ ATEX approval
■ Absolute pressure, relative pressure and vacuum measurement
■ External programming of zero point and span with FlexProgrammer 9701 Technical
Description
Technical Data :
IO-Link interface
IO-Link version 1.1
IO-Link port type Class A
Baud rate 38,4 kbaud (COM2)
Cycle time ≥ 2.3 ms
Process data length 24 bit
SIO-mode No
Process data (cyclic) Process pressure
Diagnostic data (acyclic) Process temperature
Housing
Style Compact transmitter
Overall size Refer to section “Dimensional drawings”
Material AISI 316L (1.4404)
Electrical connection
Connector DIN EN 175301-803 A (DIN 43650 A), 4-
pin
M12-A, 4-pin
M12-A, 5-pin, stainless steel, IO-Link output
Cable gland Cable Ø 8 … 10, stainless steel
Cable outlet 1.5 m, 3-wire, shielded
Power supply
Voltage supply range 13 … 30 V DC , with voltage output
8 … 30 V DC , with current output
18 30 V DC , with IO-Link
ATEX II 1/2G Ex ia IIC T4/T6 Ga/Gb
Please note For the application in Ex zone you have
to respect the conditions mentioned in
the ATEX Type Examination Certificate
(SEV 11 ATEX 0129).You will find the
relevant certificates and instructions at
www.baumer.com
Maximum values for barrier
selection, Ui
30 V DC , max.
Maximum values for barrier
selection, Ii
100 mA
ATEX II 1/2G Ex ia IIC T4/T6 Ga/Gb
Maximum values for barrier
selection, Pi
750 mW
Internal capacitance, Ci 31 nF
Internal inductance, Li 3 μH
ATEX II 1D Ex ia IIIC T (200) 107°C IP6X Da
Please note For the application in Ex zone you have
to respect the conditions mentioned in
the ATEX Type Examination Certificate
(SEV 11 ATEX 0129).You will find the
relevant certificates and instructions at
www.baumer.com
Voltage supply range, Un 30 V DC , max.
Degree of protection for
cable accessories
IP 65
ATEX II 1G Ex ia IIC T4/T6 Ga
Please note For the application in Ex zone you have
to respect the conditions mentioned in
the ATEX Type Examination Certificate
(SEV 11 ATEX 0129).You will find the
relevant certificates and instructions at
www.baumer.com
Maximum values for barrier
selection, Ui
30 V DC , max.
Maximum values for barrier
selection, Ii
100 mA
Maximum values for barrier
selection, Pi
750 mW
Internal capacitance, Ci 31 nF
Internal inductance, Li 3 μH
Compliance and approvals
EMC EN 61000-6-2
EN 61000-6-3
EN 61326-2-3
Explosion protection ATEX II 1/2G Ex ia IIC T4/T6 Ga/Gb
ATEX II 1D Ex ia IIIC T107 °C IP6X Da
ATEX II 1G Ex ia IIC T4/T6 Ga
